Why the Electro-Voice ELX200-12P Fits Club Installations

The Electro-Voice ELX200-12P is a 12-inch powered loudspeaker that has become a common choice for nightclubs, lounges, bars and KTV rooms. It pairs a 12-inch woofer with a high-frequency compression driver in a lightweight molded enclosure, and it is self-powered, so each cabinet needs only mains power and a signal feed. That simplicity is a big part of why integrators specify it.

For club work, the ELX200-12P is usually deployed in three ways:

  • Fill and delay speakers around dance floors, bars and VIP areas
  • Monitor or DJ booth speakers where a compact, punchy cabinet is needed
  • Small-room main PA in lounges, private rooms and KTV suites

Buyers choose it because it is compact, easy to rig or pole-mount, and consistent from unit to unit, which matters when you are building a multi-room venue and want predictable tuning across the site.

What Drives the Price of an ELX200-12P for a Club Project

When venue investors ask about "price for club installation," the honest answer is that the cabinet price is only one line in the budget. Several factors move the number:

  • New vs. tested used. Second-hand units in good working order cost meaningfully less than new stock, which lets a venue buy more cabinets within the same budget.
  • Condition and test status. Units that have been bench-tested, with drivers and amplifiers verified, command more than untested lots.
  • Quantity. Multi-room clubs buy in volume, and per-unit pricing improves with larger orders.
  • Accessories. Pole mounts, rigging hardware, covers and cabling add to the total.
  • Shipping and duties. For overseas projects, freight, insurance and import duties are a real part of landed cost.
  • Integration labor. Mounting, cabling, DSP tuning and commissioning are separate from equipment cost.

Because of this, a single "list price" rarely reflects what a club actually pays. The practical approach is to define the room count, coverage needs and budget first, then price a package.

New or Used: What Makes Sense for a Venue

For a new club build, used equipment is often the difference between fitting out three rooms and fitting out five. The key is buying tested stock rather than unknown lots.

At Acoustrade, used pro-audio and KTV equipment is checked before it is offered, and listings describe condition and test status. For a club installation, that means you can specify the Electro-Voice ELX200-12P across multiple zones and know the cabinets will behave consistently.

If your project also needs amplification, processing or mixing, it is worth bundling. Acoustrade supplies power amplifiers, speakers, line arrays, mixers and microphones, so a single supplier can cover the signal chain and simplify freight and documentation.

How to Specify the ELX200-12P in a Club Design

A few practical points help integrators get the most from this cabinet:

  • Match cabinet count to coverage, not to floor area alone. Dance floors, bars and VIP booths have different needs.
  • Plan power and signal drops early. Self-powered cabinets still need mains outlets at each position.
  • Use DSP for zone tuning. Separate processing per room keeps volume consistent without constant manual adjustment.
  • Leave headroom. A 12-inch cabinet pushed to its limit in a loud room will not last as long as one run with margin.
  • Keep spares. One spare cabinet per venue is cheap insurance against a dark night.

Getting a Real Price Quote

The fastest route to an accurate figure is to send Acoustrade your room layout, the number of ELX200-12P cabinets you need, and your destination port. You will get a package price covering equipment and freight, so you can compare landed cost rather than sticker price.

FAQ

How much does an Electro-Voice ELX200-12P cost for a club installation?

There is no single figure. The cabinet price depends on new vs. tested used condition, quantity and accessories, and the installed cost adds freight, duties, cabling, mounting and commissioning. Request a package quote with your room count and destination for an accurate landed cost.

Is used Electro-Voice equipment suitable for a commercial club?

Yes, when it has been tested. Commercial venues often buy tested used cabinets to fit out more rooms within budget. Confirm test status and condition before ordering.

How many ELX200-12P cabinets does a club need?

It depends on room size, ceiling height and how loud the space runs. A small lounge may need two to four cabinets, while a multi-zone club with a dance floor, bars and VIP rooms may need a dozen or more. A layout plan is the right starting point.

Can Acoustrade ship ELX200-12P cabinets to my country?

Acoustrade supplies overseas venue investors and AV integrators and quotes freight to your destination port. Share your address and quantity for a shipping estimate.

Does the ELX200-12P need an external amplifier?

No. It is a powered loudspeaker with built-in amplification, so each cabinet needs mains power and a signal feed rather than a separate amp channel.