What Is the Electro-Voice ELX200-12P?

The ELX200-12P is a 12-inch powered (active) loudspeaker from Electro-Voice's ELX200 series. It is a portable, two-way design with a built-in Class-D amplifier and onboard DSP, intended for mobile DJs, small bands, corporate events, and fixed installs in venues that need reliable full-range sound without a rack of external amps.

Because it is self-powered, you only need a mains supply and a signal source. That simplicity is a big reason the ELX200-12P remains a common sight in rental inventories and KTV rooms around the world.

ELX200-12P Key Specifications

Manufacturer specs vary slightly by revision, but the headline figures are consistent:

  • Transducer: 12-inch woofer with a 1-inch compression driver on a waveguide.
  • Amplifier: Class-D, bi-amplified, with a total peak power output in the 1200 W class.
  • Frequency response: roughly 55 Hz – 20 kHz (varies with DSP mode).
  • Coverage: 90° x 60° nominal.
  • Enclosure: polypropylene, pole-mount socket, monitor-angle option.
  • Inputs: combo XLR/TRS plus additional line inputs, with level control.
  • DSP presets: voicing modes for music, speech, and monitor use.
  • Weight: around 15–16 kg, manageable for one person.

Always confirm the exact revision and spec sheet with the seller before purchase, since EV updated firmware and presets over the product's life.

Real-World Performance and Best Use Cases

The ELX200-12P is best understood as a workhorse rather than a flagship. It plays loud enough for:

  • Mobile DJ and party setups – one or two per side, often paired with a subwoofer.
  • Small live bands – as a main PA for acoustic or low-volume electric acts.
  • Corporate and conference audio – speech reproduction is clear thanks to the DSP voicing presets.
  • KTV and private rooms – a common choice where a compact, self-powered box is needed.
  • Stage monitoring – the monitor-angle position makes it usable as a wedge.

Where it struggles is in very large rooms or high-SPL dance applications. For those, look at line array elements or larger point-source boxes, and consider adding subwoofers to extend low-end.

Buying Used ELX200-12P: What to Check

Second-hand powered speakers are a strong value if you inspect them properly. Key checks:

  • Cabinet condition: cracks, deep scratches, or swollen grilles can indicate drops or moisture.
  • Driver health: listen for rattles, buzzes, or distortion at moderate volume.
  • Amplifier and DSP: confirm all presets work and there is no intermittent cut-out.
  • Connectors: worn XLR/TRS sockets cause dropouts; test every input.
  • Fan and vents: dust buildup leads to overheating and premature failure.
  • Power supply: confirm the voltage matches your region (110–120 V vs 220–240 V).

At Acoustrade, used pro-audio gear is tested before it ships, so you know what you are getting. Browse our used powered speakers and KTV systems for current stock.

ELX200-12P vs Alternatives

If you are comparing options, keep these points in mind:

  • vs 15-inch models: more low-end, more weight, often more money. The 12-inch is easier to move and cheaper to buy in pairs.
  • vs passive speakers + external amps: simpler setup, fewer cables, but you cannot service the amp separately.
  • vs line array elements: line arrays give wider, more even coverage in large rooms; the ELX200-12P is a point-source box better suited to smaller spaces.

For most KTV rooms, small clubs, and mobile rigs, a pair of ELX200-12P units plus a subwoofer covers the majority of gigs.

FAQ

Q: Is the ELX200-12P suitable for a small live band?
A: Yes, for acoustic and low-to-mid volume electric acts in rooms up to a few hundred people. For loud rock, pair it with subwoofers and consider larger mains.

Q: Can I use the ELX200-12P as a floor monitor?
A: Yes. The enclosure has a monitor-angle position, and the DSP includes a monitor voicing preset.

Q: What should I check when buying a used ELX200-12P?
A: Cabinet integrity, driver sound quality at moderate volume, all inputs and DSP presets, fan and vent cleanliness, and correct mains voltage for your region.

Q: Do I need a subwoofer with the ELX200-12P?
A: For music with significant low-end content (DJ, dance, KTV), a subwoofer noticeably improves the experience. For speech and light music, the speaker alone is often enough.

Q: Where can I buy tested used ELX200-12P units?
A: Acoustrade supplies tested used pro-audio and KTV equipment worldwide. Check our used speakers listings or contact us for current availability.