What this unit is and who it suits

The QSC TouchMix-16 Pro is a compact digital mixer with a 7-inch color touchscreen, 16 mic/line inputs on XLR/TRS combo jacks, and a total of 22 input channels when you count the stereo returns. It was designed for working bands, small venues, houses of worship, and AV rental fleets that need a fast setup without a large console footprint.

This particular unit is listed in condition A — fully functional, with only minor cosmetic wear. It comes from verified stock and has been calibrated before listing. FOB price is $1,250 USD.

Who it suits:

  • Small to mid-size venues that mix from the stage or a side position.
  • Rental companies that want a mixer that travels well and is easy to teach to freelance operators.
  • Integrators doing fixed installs in clubs, restaurants, and conference rooms where a full analog console would be overkill.

It is not a replacement for a large-format digital console with 32+ faders. If you need extensive matrix mixing, multiple stage racks, or Dante networking, look at the higher-tier QSC models or a different platform entirely.

Key specifications explained

  • 16 mic preamps, 22 total channels. The 16 XLR/TRS combo inputs are the core. The extra channels come from stereo returns and USB playback. In practice, this covers a 5-piece band with drums, bass, two guitars, keys, and four vocal mics, plus a stereo playback source.
  • 7-inch touchscreen. This is the primary control surface. There are no motorized faders. You mix by touching the screen, which is fast for simple shows but slower for complex rides. The screen is capacitive and works with bare fingers or a stylus.
  • Built-in effects and compressors. Each input channel has a gate, EQ, and compressor. There are reverb, delay, and modulation effects on aux sends. For a bar gig or corporate event, you can mix without any outboard gear. The effects are usable, not studio-grade, but they are clean enough for live work.
  • iOS/Android control and USB recording. The mixer creates its own Wi-Fi network, and the TouchMix app lets you walk the room and adjust monitors from a tablet or phone. USB recording captures a stereo mix to a flash drive — useful for reference recordings, not for multitrack studio work.
  • Recallable presets and scenes. You can save and recall complete console states. This is a big time-saver for rental companies that set up the same band or event repeatedly.

Real condition and what our grading means

Condition A at Acoustrade means the unit is fully functional, passes our standard test routine, and shows only light signs of use — typically minor scuffs on the chassis, a clean screen, and intact connectors. It is not a new unit, and it is not a project box.

For this specific listing:

  • The touchscreen is responsive and free of dead zones.
  • All 16 mic preamps pass signal with no excessive noise or scratchy gain pots.
  • The Wi-Fi module connects reliably to both iOS and Android devices.
  • Firmware is current for the TouchMix-16 Pro.

We do not publish test data or failure rates because we do not track them in a statistically meaningful way. What we can say is that this unit was calibrated from verified stock, and it is sold as a working mixer, not as-is.

Common problems to check on this model when buying used

The TouchMix-16 Pro has a few known weak points that any used buyer should inspect:

  • Touchscreen responsiveness. These screens can become less accurate over time, especially if the unit was used in dusty or humid environments. Test the corners and edges, not just the center.
  • Wi-Fi reliability. The internal Wi-Fi can be flaky in crowded RF environments. Test the app connection at a distance and with other networks present.
  • Gain pots and connectors. Scratchy gain knobs or intermittent XLR jacks are a sign of heavy use. Wiggle each connector while a signal is passing.
  • Fan noise. The internal fan can become audible in quiet settings. Listen for it at idle.
  • Firmware and app compatibility. Older firmware may not work with the latest version of the TouchMix app. Check that the unit can be updated.
  • Power supply. The external power brick is a common failure point. Make sure the original or a correct replacement is included.

Who should buy it / who should look elsewhere

Buy it if:

  • You need a compact, rider-friendly mixer for small venues, bands, or rental stock.
  • You want touchscreen control and tablet mixing without a large console.
  • You are an integrator who needs a reliable, recallable mixer for installs where space is tight.

Look elsewhere if:

  • You need more than 16 mic inputs without adding a stage box.
  • You rely on motorized faders or extensive physical controls.
  • You need Dante, AES50, or other networked audio protocols.
  • You are looking for a studio-grade recording interface — the USB output is stereo only.

The QSC TouchMix-16 Pro is a solid workhorse for its intended use. At $1,250 FOB in condition A, it is a reasonable entry point for a venue or rental company that wants digital mixing without a steep learning curve.