Yamaha DXR15 Specifications at a Glance
The Yamaha DXR15 is a 15-inch, two-way active loudspeaker from Yamaha's DXR Series, built for live sound, DJ work, corporate events and installed PA. This page summarizes the key specifications you need when planning a system, comparing options, or sourcing used units.
Specifications below reflect the standard DXR15 model. Always confirm the exact revision and region with the seller before purchase.
Core Specifications
- Type: Two-way, bi-amplified active (powered) loudspeaker
- Frequency range: approximately 49 Hz – 20 kHz (varies by measurement standard)
- Maximum SPL: around 133 dB (peak, per manufacturer figure)
- Woofer: 15-inch cone driver
- Tweeter: 1.75-inch compression driver with horn
- Dispersion: 90° x 60° (horizontal x vertical)
- Amplifier: Class-D, bi-amplified (separate LF and HF power)
- Power rating: roughly 700 W LF + 200 W HF (peak-class figures; check the unit's label)
- Crossover: Active, DSP-controlled
Connectors and Controls
- Combination XLR/TRS input plus additional line inputs
- XLR link/thru output for chaining cabinets
- Input level controls with onboard DSP presets
- Presets for main, monitor, and speech-optimized use
- Status and limit indicators
Physical and Power Details
- Enclosure: Molded polypropylene, pole-mount socket and fly points
- Weight: approximately 20 kg (about 44 lb) class
- Power: Universal switching supply; confirm voltage for your region
- Mounting: 35 mm pole socket, M10 rigging points on many versions
What These Specs Mean in Practice
A 15-inch two-way box with roughly 133 dB peak output and 90° x 60° coverage suits mid-size rooms, mobile DJ rigs, and front-of-house for bands. The wide horizontal pattern helps cover audiences in wide rooms, while the 60° vertical keeps energy off the ceiling.
If you need more low-end for dance music, pair the DXR15 with subwoofers. For speech and conference use, the onboard presets reduce boominess and improve clarity.
Buying Used DXR15 Units
When sourcing second-hand DXR15 cabinets, check:
- Grille and cone condition, and that both drivers work
- That the amplifier and DSP power on cleanly with no error lights
- Input jacks and level knobs for wear or noise
- Cabinet corners, pole socket and rigging points
Acoustrade supplies tested used powered speakers, subwoofers and line arrays for venues and integrators worldwide, with condition reports on request.
FAQ
What is the power output of the Yamaha DXR15?
Yamaha rates the DXR15 as a bi-amplified Class-D design, with roughly 700 W for the woofer and 200 W for the tweeter (peak-class figures). Confirm the exact rating on the unit's label, as revisions can differ.
How loud is the Yamaha DXR15?
Yamaha lists a maximum SPL of around 133 dB peak. Real-world output depends on program material, placement and limiter settings.
Can the DXR15 be used as a floor monitor?
Yes. The cabinet has angled sides for monitor use, and the onboard DSP includes a monitor preset.
What is the difference between DXR15 and DXR12?
The DXR15 uses a 15-inch woofer for more low-end extension and output, while the DXR12 uses a 12-inch woofer and is lighter. Choose the 15 for full-range music, the 12 for portability and speech.
Does the DXR15 need an external amplifier?
No. It is an active speaker with built-in amplification and DSP; you feed it a line-level signal and mains power.
